HT95A40P-- I/O Type Phone 8-Bit MCU

General Description

The HT95A40P family MCU are 8-bit high performance RISC-like microcontrollers with built-in DTMF generator and dialer I/O which provide MCU dialer implementation or system control features for telecom product applications. The phone controller has a built-in program ROM, HT95A40P data RAM and I/O lines for high end products design. In addition, for power management purpose, HT95A40P has a built-in frequency up conversion circuit (32768Hz to 3.58MHz) which provides dual system clock and four types of operation modes. For example, HT95A40P can operate with low speed system clock rate of 32768Hz in green mode with little power consumption. HT95A40P can also operate with high speed system clock rate of 3.58MHz in normal mode for high performance operation. HT95A40P To ensure smooth dialer function and to avoid MCU shut-down in extreme low voltage situation, HT95A40P dialer I/O circuit is built-in to generate hardware dialer signals such as on-hook, HT95A40P hold-line and hand-free. Built-in real time clock and programmable frequency divider are provided for additional fancy features in product developments. HT95A40P device is best suited for phone products that comply with versatile dialer specification requirements of different areas or countries.

Features

•     Provide MASK type and OTP type version
•     Operating voltage range: 2.4V~5.5V
•     Program ROM
  - HT95A400/40P: 16K×16 bits
  - HT95A300/30P: 8K×16 bits
  - HT95A200/20P: 4K×16 bits
  - HT95A100/10P: 4K×16 bits 
•     Data RAM
  - HT95A400/40P: 2880×8 bits
  - HT95A300/30P: 2112×8 bits
  - HT95A200/20P: 1152×8 bits
  - HT95A100/10P: 384×8 bits
•     Bidirectional I/O lines
  - HT95A400/40P: 44 I/O lines
  - HT95A300/30P: 28 I/O lines
  - HT95A200/20P: 28 I/O lines
  - HT95A100/10P: 20 I/O lines
•     16-bit table read instructions
•     Subroutine nesting
  - HT95A400/40P: 12 levels
  - HT95A300/30P: 8 levels
  - HT95A200/20P: 8 levels
  - HT95A100/10P: 4 levels
•     Timer
  - Two 16-bit programmable Timer/Event Counter
  - Real time clock (RTC)
  - Watchdog Timer (WDT)
•     Programmable frequency divider (PFD)
  Supported for HT95A400/40P, HT95A300/30P, HT95A200/20P
•     Dual system clock: 32768Hz, 3.58MHz
•     Four operating modes: Idle mode, Sleep mode, Green mode and Normal mode
•     Up to 1.117µs instruction cycle with 3.58MHz system clock
•     All instructions in one or two machine cycles
•     Built-in 3.58MHz DTMF Generator
•     Built-in dialer I/O
•     HT95A400/40P: 64-pin QFP package
  HT95A300/40P: 48-pin SSOP package
  HT95A200/20P: 48-pin SSOP package
  HT95A100/10P: 28-pin SOP package
• Data Sheet  
• Revision History
• 封裝信息
  28-pin SOP 封裝
  48-pin SSOP 封裝
  64-pin QFP 封裝
• 支持工具
• 問答集
• 應用范例
• 相關產品信息
   
  HT95A40P、HT95C40P 電話通信產品微控制器系列
   
  HT95A、HT95L、HT95C 電話通信產品微控制器系列
   
• Selection Guide
• 產品型號索引

HT95A40P_中文PDF(點擊下載)